WAVE aluminum horizontal blinds 35 mm
Wave aluminum blinds are a concise combination of chastity structure and mild shapes. The play of light on the blind sheet wave-like blades creates an impression of water surface, visually expanding the space. The structural functionality ensures personal space privacy and easy light flux adjustment. We move away from the rigidity of horizontal lines introducing the play of shadow and mild light dispersion in the interior.
Front view |
Вид спереди |
Side view |
Вид сбоку |
product height |
высота изделия |
Amigo WAVE 35 mm horizontal aluminum blinds are recommended to be installed outside and inside openings.
These are loose-hanging rectangular-shaped models (fixed at the top)
The aluminum blades are pulled up and down by means of a cord; the blades are tilted by means of a clear plastic wand. The control may be either divided or combined.
Blind sheet may be fixed at any given level
The allowance for the ready-made product height is: +21 mm
DIVIDED CONTROL |
РАЗВЕДЕННОЕ УПРАВЛЕНИЕ |
Fig. 1 |
Рис.1 |
Fig. 2 |
Рис.2 |
Cord on the right / Wand on the left |
Веревка справа / Прут слева |
Cord on the left / Wand on the right |
Веревка слева / Прут справа |
COMBINED CONTROL |
СОВМЕЩЕННОЕ УПРАВЛЕНИЕ |
Fig. 3 |
Рис.3 |
Fig. 4. |
Рис.4 |
Right |
Справа |
Left |
Слева |
The products with width < 43.5 cm are manufactured with the divided control only.
Limit dimensions
Blade width, mm |
Width, cm |
Height, cm |
Control length*, cm |
|||
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
|
35 |
25 |
160 |
30 |
200 |
50 |
300 (wand) / unlimited (cord) |
*The tilting wand length is by default 2/3 of the product height.
- Valance. Made of two 25 mm blades of the same color with the fabric sheet.
- The bottom rail holder is designed to fix the bottom rail.
- In this case the product may only tilt.
- Divided control (if width exceeds 43.5 cm).
- The cord and wand are located on opposite sides.
2 IN 1
If two products are located next to each other, they may be installed on one head rail with individual control for each of them.
![рис10.jpg рис10.jpg](/upload/medialibrary/996/996c094601c633e79322997e33881e4e.jpg)
Measurements and standard installation:
- similar to standard models 35 cm. Distance between sheets - 1 cm.
OUTSIDE A WINDOW OPENING |
СНАРУЖИ ОКОННОГО ПРОЕМА |
Measurement recommendations: Product width = opening width + 10 cm Product height = opening height + pack height* |
Рекомендации по замерам: Ширина изделия = ширина проема + 10 см Высота изделия = высота проема + высота пакета* |
Holis bracket 240180-0000 |
Кронштейн Холис 240180-0000 |
Bottom rail holder for bottom fixation 240172-000 |
Держатель нижнего карниза для нижней фиксации 240172-000 |
Backing block for WAVE 240176-0000 |
Блок-подкладка для ВОЛНЫ 240176-0000 |
![рис16.jpg рис16.jpg](/upload/medialibrary/773/77369a0d8691cb761f67cbfbb6197f96.jpg)
INSIDE A WINDOW OPENING |
Measurement recommendations: Product width = opening width - 1 cm Product height = opening height - 1 cm |
Universal bracket 240180-0000 |
![рис17.jpg рис17.jpg](/upload/medialibrary/563/5633165f7deb769f277b794c05d849e5.jpg)
CALCULATION OF PACK HEIGHT (OF FOLDED PRODUCT)
Blind height, cm |
Pack height, cm |
50 |
6.4 |
100 |
8.1 |
150 |
9.8 |
200 |
11.5 |
250 |
13.1 |
300 |
14.8 |