Horizontal wooden and bamboo blinds 50 mm
Side view |
Вид сбоку |
product height |
высота изделия |
Amigo horizontal wooden blinds 50 mm are loose-hanging rectangular or trapezoid models recommended to be installed outside/inside an opening.
decorative wooden valance closing the front head rail
50 mm wide 2.9 mm thick wooden blades or 2.0 mm thick bamboo blades
wooden/bamboo bottom rail
Control options:
The blades are pulled up and down by means of one cord and tilted by means of a separate pair of cords.
COMBINED CONTROL |
СОВМЕЩЕННОЕ УПРАВЛЕНИЕ |
DIVIDED CONTROL |
РАЗВЕДЕННОЕ УПРАВЛЕНИЕ |
Limit dimensions
Material |
Width, cm |
Height, cm |
Max. area. sq.m |
Control length*, cm |
|||
Min. |
Max. |
Min. |
Max. |
Min. |
Max. |
||
Wood |
42 |
270 |
40 |
300 |
3.5 |
30 |
Unlimited |
Bamboo |
42 |
178 |
40 |
300 |
3.8 |
*Standard control length is by default 2/3 from the product height
- Angle valance. Closes the head rail on both ends.
-
Side fixation. Blind sheet fixation on both sides using steel wires routed through the special side openings in the blades.
Does not prevent pulling the blades up/down.
The bottom rail holder is designed to fix the bottom rail. In this case the product may only tilt.
Divided control (if width exceeds 43.5 cm). The cord and wand are located on opposite sides.
25 mm wide decorative ladder that closes the blade openings.
SPECIAL SHAPES
TRAPEZOIDS AND HALF-TRAPEZOIDS
Trapezoid-shaped blinds are the functional solutions for openings with a small bevelled edge.
Half-trapezoid |
Полутрапеция |
Trapezoid |
Трапеция |
The bevel size is limited with the following dimensions depending of the blinds width:
Bevel limit, D
Model |
Bamboo |
Wood |
Trapezoid |
25 cm |
50 cm |
Control:
The wooden blades are pulled up and down by means of a pull cord and tilted by means of a separate pair of cords. Divided control;
standard design - pull is on the left, tilt is on the right.
Measurements and installation:
Similar to standard model 50 mm.
Height, width at the bottom and width at the top are measured.
Additional option:
Side fixation for half-trapezoid is possible from the side opposite to the bevel.
Side fixation for trapezoid is not provided.
2 IN 1
If two products are located next to each other, they may be installed on one head rail with individual control for each of them.
Measurements and standard installation:
similar to standard models 50 mm. Distance between sheets - 1 cm.
OUTSIDE A WINDOW OPENING |
СНАРУЖИ ОКОННОГО ПРОЕМА |
Measurement recommendations: Product width = opening width + 10 cm Product height = opening height + pack height* |
Рекомендации по замерам: Ширина изделия=ширина проема + 10 см Высота изделия=высота проема + высота пакета* |
Set of standard brackets |
Комплект стандартных кронштейнов |
INSIDE A WINDOW OPENING |
ВНУТРИ ОКОННОГО ПРОЕМА |
Measurement recommendations: Product width = opening width - 1 cm Product height = opening height - 1 cm |
Рекомендации по замерам: Ширина изделия=ширина проема - 1 см Высота изделия=высота проема – 1 см |
Set of standard brackets |
Комплект стандартных кронштейнов |
CALCULATION OF PACK HEIGHT (OF FOLDED PRODUCT)
Blind height, cm |
Pack height, cm |
|
wood |
bamboo |
|
50 |
10.5 |
10.3 |
100 |
14.7 |
13.0 |
150 |
18.9 |
15.8 |
200 |
23.1 |
18.6 |
250 |
27.2 |
21.3 |
300 |
31.4 |
24.1 |