Electrically driven pleated shades for vertical windows (up to 15°)
Amigo pleated shades of this series are designed to be installed both outside and inside of standard openings as well as on tilt and turn windows with slope angle up to 15°.
These are the loose-hanging models (fixed at the top) or models with protection against sagging (fixed at the bottom on a window shoe bracket or fixed rail).
Rectangular models
The shade is pulled up and down by means of the electrical drive integrated into the high head rail. The shade top and bottom position is defined by the internal brake/spindle block.
Voltage: 12 or 24 V DC
Remote control is carried out via a wallboard switch/control panel
Electrical control may be individual (for each shade), group (for each group of shades) or combined.
The textile sheet may be fixed at any given level.
All installation methods are applicable to the models of this series (ref. to the section "Installation methods")
Measurements are taken similar to standard models
• Dimension type: of a product (default) or an opening.
Product - dimensions of rectangular products will correspond exactly with those specified in the request. Dimensions of complex-shaped products will correspond to the model configuration.
Opening - dimensions of rectangular products will be reduced by 2 mm from either side to fit inside the opening.
• Bracket type: depends on the installation location.
• Color palette: white, silver, bronze., brown (plugs and brackets are black)
• Face: outside or inside (default).
Outside - fabric face will be on the side of the glass
• Cord with loops: yes or no (default). It is used for equal distribution of the fabric folds along the product height. It is used only for the rectangular models. It is fitted only at the product fabrication stage behind the fabric sheet. Its further fitting inside the ready-made product is not possible.
There are no additional designs
View/download measurement instructions
View/download installation and operation instructions