UNI1-ZEBRA (BESTA) roller blinds for PVC windows with minimum 14 mm fillet depth

Description

рис73.jpg

UNI 1 ЗЕБРА	UNI 1 ZEBRA
35 – саморезы	35 - self-tapping screws
38 – скотч	38 - adhesive tape
70 – саморезы	70 - self-tapping screws
80 - скотч	80 - adhesive tape

Amigo UNI 1 ZEBRA roller blinds of the given control type are designed to be installed on vertical and tilt and turn PVC windows with 0-15° slope angle.

The fabric is unwinded inside the fillet space (between the glass and the guide)

The fabric is winded onto the tube installed inside the box

Flat guides

The fabric sheet is pulled up and down by means of a control chain routed through the drum-type control mechanism that may be located either leftward or rightward in the upper winding tube.

The textile sheet may be fixed at any given level.

The models of this type may be installed on the frame using varous methods:

drilling

attaching with adhesive tape

Color of UNI 1 ZEBRA fittings: white, brown, light oak, gold oak and mahogany.

For PVC windows with rectangular fillet with minimum 14 mm depth

Model	Width, cm		Height, cm		Control length
Model	Min.	Max.	Min.	Max.	Control length
UNI 1 ZEBRA	35	140	35	230*	Ref. to table**

* Depends on the fabric gauge

** You may select any control height from the table

CONTROL LENGTH FROM THE PRODUCT HEIGHT (DEFAULT)
Product height, m	Control length, m
Up to 0.7	0.4
0,701…0,9	0.6
0.901…1.1	0.8
1.101…1.3	1.0
1.301…1.6	1.0
1.601…1.8	1.4
1.801…2.1	1.6
2.101…2.3	1.8
-	2.0

fig. 74

Options

Chain tensioner. Allows to fix the chain along the frame plane and maintain the product operability.
Fixation type: drilling or adhesive tape

Additionaly

There are no additional designs

Measurement and installation

рис72.jpg

PVC FRAME WITH RECTANGULAR FILLET WITH MINIMUM 14 MM DEPTH
Model	Width, cm			Height, cm
Model	for order form	as per box	as per fabric	for order form	ready-made product
UNI 1	L	L + 3	L – 1.5	H	H + 2,7 (self-tapping screws) H 3.8 (adhesive tape)

Плоская лицевая поверхность штапика должна быть не менее 1 см.	Flat fillet face shall be minimum 1 cm.
высота, H	height, H
ширина, L	width, L
кромка штапика	fillet edge
глубина штапика	fillet depth
штапик	fillet
рама окна	window frame
стекло	glass
высота, ширина	height, width
кромка штапика	fillet edge
стекло	glass
кромка штапика	fillet edge
глубина штапика	fillet depth