UNI2 (BESTA) roller blinds for PVC windows with any fillet depth

CONTROL - CHAIN.

Amigo UNI 2 roller blinds of the given control type are designed to be installed on vertical and tilt and turn PVC windows with 0-15° slope angle.

They are designed for PVC windows with any fillet depth and shape (excluding protruding one)

The fabric is unwided in the guides

The fabric is winded onto the tube installed inside the box

C-shaped guides

The fabric sheet is pulled up and down by means of a control chain routed through the drum-type control mechanism that may be located either leftward or rightward in the upper winding tube.

The textile sheet may be fixed at any given level.

The models of this type may be installed on the frame using varous methods:

drilling

attaching with adhesive tape

Color of UNI 2 fittings: white, silver, brown, light oak, gold oak, mahogany.

CONTROL - SPRING/HANDLE

Amigo UNI 2 roller blinds with a spring are designed to be installed on vertical, tilt and turn, dormer windows and skylights with any slope angle.

This is UNI 2 model in the decorative box with C-shaped guides.

UNI 2 model may be installed on PVC windows with any fillet depth and shape excluding protruding one.

The fabric sheet is pulled up and down by means of a handle installed in the middle of the bottom rail. The spring mechanism incorporated in the upper winding tube provides for the fabric constant tension.

The textile sheet may be fixed at any given level. Turn the control handle and pull it downward to pull the fabric sheet down. Then, while holding the handle, turn it upward to fix the fabric sheet position at the desired level.

Fittings color: white