MGS (BESTA) ZEBRA roller blinds to close openings

Description

рис98.jpg

Вид спереди	Front view
Вид сбоку	Side view
Монтаж снаружи проема	Installation outside an opening

The roller blinds of this type are designed to be installed on/in openings.

These are loose-hanging models.

The fabric sheet is pulled up and down by means of a control chain routed through the control mechanism that may be located either leftward or rightward in the upper tube.

The fabric always has back winding (the roll is visible). The textile sheet may be fixed at any given level.

The structure of this model utilizes a steel winding 25 mm tube.

The following installation methods are applicable for the models of this type: inside an opening and outside an opening.

The model always has an installation profile.

Fittings color: white.

WARRANTY DIMENSIONS

рис100.jpg

Width, cm		Height, cm	Control length*
Min.	Max.	Max.	Control length*
35	200	300	see table

*You may select any control height from the table

CONTROL LENGTH FROM THE PRODUCT HEIGHT
Product height, m	Control height, m
Up to 0.9	0.5
0.901…1.1	0.8
1.101…1.3	1.0
1.401…1.6	1.3
1.601…2.0	1.5
2.001…2.4	1.8
2.401…2.6	2.0
2.601…2.8	2.3
2.801…3.0	2.5

Options

Additional option: decorative box closing the tube with the winded fabric. Maximum product height - 2.2 m. Recommended to be installed inside an opening.

Box

рис99.jpg

Вид сбоку	Side view
Монтаж внутри проема с декоративным коробом	Installation inside an opening with decorative box
* Указаны размеры изделия без учета ткани. Ткань, намотанная на трубу, может увеличить габариты изделия	* Specified product dimensions do not include fabric. The fabric winded onto the tube may increase the product dimensions

Additionaly

There are no additional designs

Measurement and installation

рис101.jpg

СНАРУЖИ ОКОННОГО ПРОЕМА	OUTSIDE A WINDOW OPENING
Вид спереди	Front view
Вид сбоку	Side view
Рекомендации по замерам: Ширина ткани = ширина проема + 15 см Высота шторы = высота проема + 15 см Внимание! Ширина шторы = ширина ткани + 3,2 см В бланке заказа можно указывать как ширину ткани, так и ширину шторы	Measurement recommendations: Fabric width = opening width + 15 cm Blind height = opening height + 15 cm Attention! Blind width = fabric width + 3.2 cm Both fabric width and blind width may be specified in the order form
Кронштейн потолочный MGS, ЗЕБРА	Fabric width = opening width + 15 cm

ВНУТРИ ОКОННОГО ПРОЕМА	INSIDE A WINDOW OPENING
Вид спереди	Front view
Вид сбоку	Side view
Рекомендации по замерам: Ширина ткани = ширина проема – 0,5 см Высота шторы = высота проема - 1 см Внимание! Ширина шторы = ширина ткани - 3,2 см В бланке заказа можно указывать как ширину ткани, так и ширину шторы	Measurement recommendations: Fabric width = opening width - 0.5 cm Blind height = opening height - 1 cm Attention! Blind width = fabric width - 3.2 cm Both fabric width and blind width may be specified in the order form
Кронштейн потолочный MGS, ЗЕБРА	MGS, ZEBRA ceiling bracket