LVT (LOUVOLITE) ZEBRA CLASSIC roller blinds to close openings
CONTROL - CHAIN
LVT ЗЕБРА |
LVT ZEBRA |
Вид спереди |
Front view |
Вид сбоку |
Side view |
LVT roller blinds with chain mechanism are loose-hanging models
The fabric sheet is pulled up and down by means of a control chain routed through the control unit that may be located either leftward or rightward
The fabric may be circumferentially winded (the roll is visible) and back winded (the roll is invisible). LVT Zebra products always have back winding. The textile sheet may be fixed at any given level
The following tubes are used in the structure of this model: 32 mm, 45 mm and 45 mm reinforced
Fittings color: white
LVT CLASSIC LIMIT DIMENSIONS
ROLLER BLIND SYSTEM |
FABRIC WEIGHT G/M2* |
PRODUCT WIDTH, M |
|
|||
1.5 |
2.0 |
2.5 |
3.0 |
|||
32 mm |
<200 |
3 |
3 |
- |
- |
MAXIMUM PRODUCT HEIGHT, M |
200-320 |
3 |
3 |
- |
- |
||
>320 |
3 |
2.15 |
- |
- |
||
45 mm |
<200 |
3 |
3 |
3 |
3 |
|
200-320 |
3 |
3 |
3 |
2.8 |
||
>320 |
3 |
3 |
3 |
1.85 |
||
45+ mm |
<200 |
3 |
3 |
3 |
3 |
|
200-320 |
3 |
3 |
3 |
3 |
||
>320 |
3 |
3 |
3 |
3 |
*Ref. to the end of section for fabric types
DEFAULT CONTROL LENGTHS
MODELS |
PRODUCT HEIGHT, M |
CONTROL LENGTH, M |
CHAIN MATERIAL |
with standard roller fabric |
0…3.000 |
0.75 x height |
plastic, metal |
with ZEBRA fabric |
0…1.099 |
1,3 x height |
plastic, metal |
1.100…1.600 |
1.0 (loop) |
plastic |
|
1.601…2.200 |
1.5 (loop) |
plastic |
|
2.201…3.000 |
1,3 x height |
plastic, metal |
CONTROL - SPRING
Вид спереди |
Front view |
Вид сбоку с прямой намоткой |
Side view, circumferential winding |
Вид сбоку с обратной намоткой |
Side view, back winding |
LVT roller blinds with spring mechanism are loose-hanging models
The fabric sheet is pulled up and down by means of a spring mechanism incorporated in the upper tube
The fabric may be circumferentially winded (the roll is visible) and back winded (the roll is invisible)
The textile sheet may be fixed at any given level
The structure of this model incorporates a winding 32 mm tube
The following installation methods are applicable for the models of this type: inside an opening, outside an opening
Fittings color: white
LVT SPRING LIMIT DIMENSIONS
ROLLER BLIND SYSTEM |
WIDTH, CM |
MAX. HEIGHT, CM |
MAX. AREA, M2 |
32 mm |
58-63 |
120 |
ref. to diagram |
64-180 |
180 |
* Ref. to the end of section for fabric types
Линия ограничения |
Limit line |
Максимальная гарантийная площадь ГИ, м2 |
Max. warranty area of ready-made product, m2 |
Вес ткани г/м2 |
Fabric weight g/m2 |
Диаграмма 1. Ограничение размеров готового изделия для моделей с пружиной (Пружина 32 мм LVT, Пружина кассета LVT) |
Diagram 1. Ready-made product dimensional limit for spring models (LVT Spring 32 mm, LVT spring cassette) |
Гарантийными будут являться те ГИ, параметры которых (вес и площадь) находятся ниже «Линии ограничения» |
Warranty ready-made products are those which parameters (weight and area) are below the "Limit line" |
An installation profile may be used for simplified installation (for 32 mm and 45 mm) The installation profile significantly facilitates the product installation process and sometimes helps to solve the problem of an upper light gap
Система 32/45 мм |
32/45 mm system |
Вид спереди |
Front view |
Крепление: стена |
Fixation: wall |
Крепление: потолок |
Fixation: ceiling |
Вид сбоку |
Side view |
мм |
mm |
КРЕПЕЖНЫЕ ЭЛЕМЕНТЫ |
FIXTURES |
Кронштейн для монтажного профиля |
Bracket for installation profile |
Additional option: side fabric fixation on wires routed through side openings in a lower rail, with lower fixation to a wall/sill.
Сторона управления |
Control side |
Вид спереди |
Front view |
Фиксация тканевого полотна с обеих сторон на тросики стабилизирует положение изделия в целом и в то же время не препятствует свободному движению шторы вверх/вниз |
The fabric sheet fixation from both sides on wires stabilizes the product position as a whole and does not prevent the free movement of the blind up/down |
Рекомендации по замерам: При установке снаружи проема Ширина шторы = ширина проема + 10 мм |
Measurement recommendations: |
Рекомендации по замерам: При установке внутри проема Ширина шторы = ширина проема - 16 мм |
When installing outside an opening |
Крепление: стена |
Blind width = opening width + 10 mm |
Крепление: потолок |
Measurement recommendations: |
Вид сбоку |
When installing inside an opening |
мм |
Blind width = opening width - 16 mm |
Roll visibility
Easylift spring (Classic 45, 45+)
Extended bracket (Classic 45, 45+)
Bottom rail with fabric
Type of control chain
Width type: fabric or ready-made product
There are no additional designs
СНАРУЖИ ОКОННОГО ПРОЕМА |
OUTSIDE A WINDOW OPENING |
Вид спереди |
Front view |
Рекомендации по замерам: Ширина шторы = ширина проема + 15 см Высота шторы = высота проема + 15 см Внимание! Ширина ткани = ширина шторы – 3,5 см В бланке заказа можно указывать как ширину ткани, так и ширину шторы |
Measurement recommendations: Blind width = opening width + 15 cm Blind height = opening height + 15 cm Attention! Fabric width = blind width - 3,5 cm Both fabric width and blind width may be specified in the order form |
ВНУТРИ ОКОННОГО ПРОЕМА |
INSIDE A WINDOW OPENING |
Рекомендации по замерам: Все модели LVT без кассеты, кроме LVT ЗЕБРА Ширина шторы = ширина проема – 0,5 см Высота шторы = высота проема |
Measurement recommendations: All LVT models without cassette, except LVT ZEBRA Blind width = opening width - 0,5 cm Blind height = opening height |
LVT ЗЕБРА Ширина шторы = ширина проема – 0,5 см Высота шторы = высота проема – 1,0 см |
LVT ZEBRA Blind width = opening width - 0,5 cm Blind height = opening height - 1.0 cm |
Внимание! Ширина ткани = ширина шторы – 3,5 см В бланке заказа можно указывать как ширину ткани, так и ширину шторы |
Attention! Fabric width = blind width - 3,5 cm Both fabric width and blind width may be specified in the order form |
Вид спереди |
Front view |
Вид сбоку |
Side view |
мм |
mm |
FIXTURES FOR INSTALLATION OUTSIDE AND INSIDE A WINDOW OPENING
мм |
mm |
(удлиненный без крышки) |
(extended, no cover) |