Electrically driven UNI/MINI roller blinds

Amigo DM16LE-0,3/50 drive, 12 V is used to motorize UNI and MINI models. It also has the integrates battery in addition to the integrated radio receiver. Installation of these roller blinds does not require application of wires. The battery is charged from the charger similar to a mobile phone.

The drive has an intermediate position adjustment option, that is especially important for the products with ZEBRA fabrics.

Each motorized UNI and MINI product shall be tuned in to an individual radio transmitter channel.

Only a multi-channel radio transmitter is used to implement group control with no additional elements required

Dimensions of motorized product brackets and cassettes correspond to manually controlled products, ref. to the section 4 of the Book of Seller

Warranty dimensions

Verification of compliance with the warranty dimensions is carried out in 2 stages:

Check the maximum winding height of the selected fabric for each system individually (ref. to the tables of Appendix 1 for rolled fabrics and Appendix 2 for ZEBRA fabrics)

Check the possibility of manufacturing the selected system depending on the product dimensions, tube diameter and fabric group (ref. to the diagrams of Appendix 3 for 35, 45 and 55 mm tubes.)

1. Model	Width, m		Height, m	Model	Product width, m		Height, m
   	Min.	Max.	Max.		Min.	Max.	Max.
   UNI1	0.43**	1.5	2.0	MINI	0.46	1.5	2.0
   UNI2	0.44*
   UNI1 ZEBRA	0.43**	1.5	2.3	MINI ZEBRA			2.3
   UNI2 ZEBRA	0.44*

   1. * Size as per dimensions (of guides)

   2. ** Size as per filled edges (ribs)
   

• Operating voltage: 12 V DC

  Motor protection degree: IP44>

  Temperature mode of operation: from 0 to +40℃

  Antenna length: 16 cm

  Charger wire length: 1.5 m

  Number of up/down operating cycles on one battery charge: up to 600 (operating time is approx. 4 months)

  Battery charging time: approx. 1 h

  Battery type: lithium

  Wire location: left or right

  Maximum continuous run time: 4 min.
  

• Motorized product

  Product installation instructions

  Control device as selected (ordered separately)

  DC264 charger (ordered separately)